Question: What Happens If It Rains After Applying Thompson’S Water Seal?

Is Thompson’s Water Seal good?

– Thompson’s® WaterSeal® is a very inexpensive product to purchase and coverage is exceptional.

Unfortunately the saying “you get what you pay for” applies here as the Thompson’s® WaterSeal® offers no UV protection whatsoever.

– After 2 years the entire deck was covered in black mold..

What is the longest lasting deck sealer?

Longest-Lasting Seal. Olympic Maximum Waterproofing Sealant. … Best Overall. Seal-Once Marine Premium Wood Sealer. … Easiest Application. Eco Advance Exterior Wood Waterproofer. … Best Value. Olympic Smartguard Concentrated Sealant. … Longest-Lasting Seal. … Best Overall. … Easiest Application. … Best Value.More items…

What is the best way to apply Thompson’s Water sealer?

Be sure that both surface and air temperature are above 50˚F during application and for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application. Perform the splash test. Sprinkle water on various sections of surface to be sealed.

Can you use a sprayer to apply Thompson’s Water Seal?

Answer: The manufacturer of Thompson Water Seal recommended that you use their product with a plastic sprayer with a brass wand, such as our Chapin Premier sprayer. … Once you are done with the product, it is recommended that you run mineral spirits through the sprayer and then water to clean it.

How long does Thompson Water Seal take to dry before rain?

When to Seal Your Deck The forecast should indicate no rain for at least 24 hours after application. The deck surface should be allowed to dry for at least 48 hours before application.

Can you use Thompson’s Water Seal on wet wood?

Thompson’s® WaterSeal® Waterproofing Stains can be applied to damp wood, so you only have to wait about two hours to begin applying stain. Some of our other products require that the wood dry for 48 hours before applying a deck coating.

Is it better to stain or seal a deck?

A: It’s really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. … The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

How do you remove Thompson’s Water Seal from skin?

Soak your hands in warm water for about five minutes. This helps soften the skin and loosen the Seal-It. Dry hands on a towel, then rub a drop of hand lotion over the area with the Seal-It on it. Gently wipe off the lotion to remove the softened Seal-It.

Is it too late to seal my deck?

At least 24 hours of clear weather is the rule of thumb. 4. Seal your deck every year. If you want your want to protect your deck and look brand new – or as close to it as possible – you should reseal it once a year.

What happens if it rains on a freshly stained deck?

If it rains within 48 hours after you apply the stain, the water will soak into the wood pores and try to displace the stain. This will result in a splotchy surface rather than an even tone. If it rains right after you apply the stain, the stain will peel and flake off.

How long does Thompson’s Water Sealer last?

10 yearsIf applied correctly, Water Seal will last up to 10 years. This is dependent on conditions such as orientation of the wall and local climate.

What temperature do you apply Thompson’s Water Seal?

Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application. Perform the splash test. Sprinkle water on various sections of surface to be sealed.

How many coats does Thompson’s Water Seal have?

one coatThompson’s WaterSeal Waterproofing Stains. Application: Only one coat is recommended for both Semi –Transparent & Solid. A second coat can be added if more color is desired. Allow the first coat to dry (approximately 2 hours) before second application.

What happens if you seal wet wood?

If you try to apply stain or sealer over damp or dirty wood, then there won’t be proper adhesion. Make sure there is no mildew as well. To achieve this, use a wood cleaner and thoroughly wash your deck. If there is still residual signs of old sealer, then you may need to wash your deck with a wood stain/sealer remover.

Should I seal my deck after power washing?

Your deck needs at least two full days to dry after you wash it and before you seal it. While you can always apply sealer with a paintbrush, it’s faster and easier on your knees to use a roller or a sprayer.