Question: Is It Normal To See Daylight Through My Roof?

Should you see daylight through a ridge vent?

If you have ridge vents, this is pretty normal.

The light, if the ridge vent was installed properly, should be about a foot from the end of the ridge.

When you look from the outside, the ridge shingles are raised between the 2 ends.

And each end is about 4 feet long..

How long does roofing felt last under tiles?

Roofs constructed using the premium, professional grades of roofing felt will be built up using multiple layers and types of felt. These will typically be guaranteed by the manufacturer to be durable for 10 years to 20 years, with an expected lifespan of another 5 years to 10 years.

How do I stop condensation in my attic?

Preventing attic condensationMake sure kitchen and bathroom exhaust fans aren’t routed into the attic. They’ll only bring more humidity to the space.Regulate the attic’s temperature. Use ventilation to keep the temperature consistent and avoid heat buildup that melts snow on the roof.Insulate and air seal.

How can I tell if I have a ridge vent?

You Can Look in your attic if you see light all along the ridge you have ridge vent.

Do ridge vents get clogged?

Ridge Vents Can Become Plugged! totally blocked by wasp nests or dust and mold or mildew. Add to that the intake or soffit vents facing the same problem. The picture to the right shows a ridge ventilation filter entirely blocked off by dust.

How often should a felt roof be replaced?

It’s not uncommon for a felt roof to last only just over two years before it needs to be replaced. For many homeowners who opt for a felt roof, they can feel as though they have found themselves with a leak no sooner than they have had the roof installed.

Should you see light in attic?

On a clear night turn on the attic light (or put a strong light into your attic) and go outside and look up. The only light you should see should be at the vents and window. Walk around the house. … At most there should be a glow of light at the eaves (end of rafters by floor) you should not be able to see your neighbor.

Should there be a gap between roof and wall?

In both headwall and sidewall conditions, unless the exterior wall is brick, you should see a gap of at least 1½ inches between the bottom of the exterior wall-covering material and the top of the roof-covering material. You’ll often see exterior wall coverings installed right down on top of the shingles.

How often should you check your attic?

every 3 to 6 monthsYour attic is the key to the overall longevity of your home and should be evaluated often. I recommend poking your head up there every 3 to 6 months. Check for each of these items every time. This will make for a clean and healthy attic.

Should ridge vent go all the way across roof?

The answer is strictly one of aesthetics. The venting in the roof should never be cut all the way to the edge but that doesn’t mean you can’t install the vent cap all the way to the edge. … If you are considering a roofing, siding or window or painting project we always provide a free, no-pressure estimate.

What is the purpose of felt under roof tiles?

WHAT IS THE PURPOSE OF FELT UNDER ROOF TILES? Roofing felt is usually required under roof tiles to prevent the desk from being exposed, it also may be applied as your roof deck may not lie perfectly straight. A layer of roof felt gives you an even surface to install tiles/shingles.

Can you felt a roof without removing tiles?

freddiemercurystwin. You don’t need any felt if the tiles are OK. If you are getting leaks through the tiles then they probably need replacing anyway.